 |
|
HDI PCB is the shortened form of High Density Interconnector PCB. It's a technology of printed circuit board production.
It uses the micro blind & buried vias technology with high density circuits layout on the PCB board. It's a compact PCB that is designed for small volume users. It uses the design of modular paralle capacity of 1000VA, say height of 1u, natural cooling down, and it can be placed into the rack of 19" directly, the max parallel that can be connected in is up to 6 modules. This special products uses all digital signal processing (DSP) technology and multiple patented technology, it has the ful range of adaptability to load capacity and strong short-term overload capacity, and can ignore the factor of load power and crest.
Advantages of HDI PCB can be small size, high frequency and high speed. Mainly used for PC, cellphones and digital cameras...
Product Details:
Payment & Shipping Terms:
|
| SMT And DIP: | Support | Application: | Light Application |
|---|---|---|---|
| Components: | Supplied By Customers Or Supplied By Manufacturer | PCB Test: | AOI ; 100%test For Open And Short; |
| PCB: | HDI With Laser And Buried Holes | ||
| High Light: | FR4 Rigid Printed Circuit Boards,1OZ Rigid Printed Circuit Boards,4L HDI Flex PCB Boards |
||
4L HDI Flex and Rigid Gold Finger Printed Circuit Boards
1. Detailed Specifications
| Material | Shengyi FR4 |
| Board Thickness | 1mm |
| Surface Treatment | Immersion Gold; |
| Copper Thickness | 1/1/1/1OZ |
| Soldermask | White; Black |
| Silkscreen | Black; White |
| The Min Laser Drill Hole | 4 Mill |
| Panel | V-Cut |
The term "4L HDI Flex 1OZ FR4 Rigid Gold Finger Printed Circuit Boards" refers to a specific type of printed circuit board with certain characteristics. Let's break down each component:
4L: This stands for "4-layer," indicating that the PCB has four layers of conductive material separated by insulating layers. Each layer can contain circuit traces and components.
HDI: HDI stands for "High-Density Interconnect." It refers to a design technique used to increase the circuit density and reduce the size of the PCB. HDI technology allows for finer traces, smaller vias, and tighter component placement.
Flex: "Flex" refers to the flexible portion of the PCB. A flexible PCB, also known as a flex circuit, is made of a flexible substrate material that allows the board to bend or conform to a specific shape. Flex PCBs are often used in applications where space or weight constraints are a concern.
1OZ: This refers to the copper weight or thickness of the copper foil used on the PCB. "1OZ" stands for 1 ounce, which is a common copper weight measurement. It indicates that each square foot of the copper layer weighs approximately 1 ounce.
FR4: FR4 is a widely used PCB substrate material. It stands for Flame Retardant 4, and it is a glass-reinforced epoxy laminate material. FR4 is known for its good electrical insulation properties, mechanical strength, and flame resistance.
Rigid: "Rigid" indicates that a portion of the PCB is not flexible. In this case, it refers to the rigid portion of the board, which is typically used for mounting components and providing structural support.
Gold Finger: "Gold Finger" refers to a specific type of surface finish on the exposed copper pads or fingers of the PCB. Gold is used because it offers excellent conductivity, corrosion resistance, and durability. Gold fingers are often found on PCBs that interface with connectors or sockets.
Overall, a 4L HDI Flex 1OZ FR4 Rigid Gold Finger PCB combines the advantages of a 4-layer PCB design, high-density interconnects, a flexible portion, a copper weight of 1 ounce, a rigid section for component mounting, and gold fingers for improved connectivity and durability. This type of PCB is commonly used in applications that require both flexible and rigid sections, such as certain medical devices, aerospace systems, and portable electronics.
2. Pictures
FAQ
Q: What files do you use in PCB fabrication?
A: Gerber or Eagle, BOM listing, PNP and Components Position
Q:Is it possible you could offer sample?
A: Yes, we can custom you sample to test before mass production
Q: When will I get the quotation after sent Gerber, BOM and test procedure?
A: Within 6 hours for PCB quotation and around 24-48 hours for PCBA quotation.
Q: How can I know the process of my PCB production?
A: 5-7days for PCB production and components purchasing, and 14 days for PCB assembly and Testing.
Q: How can I make sure the quality of my PCB?
A: We ensure that each piece of PCB products work well before shipping. We'll test all of them according to your test procedure.
Contact Person: Stacey Zhao
Tel: +86 13392447006
Fax: 86-755-85258059
