|
Computer Circuit Board means that the PCB/PCBA is applied to the computer.
Characteristics:
1. Densification: The high density of PCB can be developed with the improvement of IC integration and installation technology.
2. High reliability (Hi-Rel): Through a series of inspections, tests and aging tests.
3. Designability: Can be achieved through standardization and standardization of design, with short time and high efficiency.
4. Productibility: Adopting modern management, can carry out standardization, scale (quantity) change, automation and so on production, guarantee product quality consistency.
5. Testability: A complete test method is established to test all kinds of test equipment and instruments to test and identify the PCB product's qualification.
6. Composability: Not only facilitate the standardized assembly of various components, but also enable the automatic large-scale production.
7. Maintainability: As PCB products and various components are standardized design and mass production, therefore, in case of system failure, the system can be replaced quickly.
What is a Computer Circuit Board?
The Computer Circuit Board is one of the core components in a computer. It is equivalent to the skeleton or trunk of a computer, used to support the connection of various hardware. All the hardware in the computer must be installed and connected to the Computer Circuit Board, so the Computer Circuit Board can also be called the Computer Circuit Board. Some of the hardware mentioned above, such as CPU, memory, hard disk, graphics card, network card, sound card, etc., must be installed on the Computer Circuit Board so that these hardware can work normally and cooperate with each other.
The composition of the Computer Circuit Board
The Computer Circuit Board is actually a large rectangular circuit board (PCB board). There are generally BIOS chips, BIOS batteries, I/O control chips, various interfaces, indicator light connectors, expansion slots and other components on the Computer Circuit Board.
The role of the Computer Circuit Board
Provide a platform for the combination of various hardware, just like an aircraft carrier can carry various fighters and provide a platform for fighters. The combined Computer Circuit Board system is a computer host. As long as peripherals such as monitors, keyboards, mice, etc. are added, it is a complete computer, also known as a PC.
Product Details:
Payment & Shipping Terms:
|
Material: | Shengyi FR4 | PCB Assembly: | Support |
---|---|---|---|
SMT: | Support | The Min Hole: | 0.2mm |
Surface Treatment: | Immersion Gold | Finished Copper Thickness: | 1OZ |
Highlight: | electronic pcb board,motherboard pcb |
8L Computer Circuit Board Blue Soldmask Immersion Gold SMT circuit board
An 8-layer computer circuit board manufacturer can provide a range of services related to the production of 8-layer PCBs. Here are some of the capabilities and services typically offered by such manufacturers:
PCB Design Review: Manufacturers can review the PCB design files provided by the customer to ensure they are manufacturable and meet the required specifications. They can offer feedback and suggestions for design improvements if necessary.
PCB Prototyping: Manufacturers can produce prototype 8-layer PCBs based on the provided design files. Prototyping allows for testing and validation of the design before moving on to large-scale production.
PCB Fabrication: The manufacturer will fabricate the 8-layer PCBs according to the design specifications. This involves processes such as layer alignment, copper etching, drilling, plating, and applying solder mask and silkscreen.
Layer Stack-up: The manufacturer will configure the layer stack-up for the 8-layer PCB, determining the arrangement and order of the copper layers, insulating layers, and other required elements.
Copper Weight and Thickness: The manufacturer can offer options for copper weight and thickness for the inner and outer copper layers of the 8-layer PCB. This can be customized based on the specific requirements of the design.
Surface Finish: The manufacturer can provide various surface finish options for the PCB, such as HASL (Hot Air Solder Leveling), ENIG (Electroless Nickel Immersion Gold), OSP (Organic Solderability Preservative), or immersion tin.
Electrical Testing: Manufacturers often perform electrical testing to ensure the functionality and performance of the 8-layer PCBs. This can include tests such as continuity testing, impedance testing, and functionality testing.
Quality Control: Manufacturers have quality control measures in place to ensure the final PCBs meet the required standards. This can include visual inspection, dimensional checks, and automated testing.
Customization and Special Requirements: Manufacturers can accommodate special requirements, such as controlled impedance, high-speed design considerations, specific material choices, or unique design constraints.
Large-Scale Production: Once the prototype and testing stages are complete, the manufacturer can handle large-scale production of 8-layer PCBs to meet the customer's production needs.
It's important to note that specific capabilities and services may vary between manufacturers, so it's recommended to contact the manufacturer directly to discuss the details of your project and confirm their offerings.
1. Detailed Specifications
Material | Shengyi FR4 |
Silkscreen | Blue |
Soldermask | White |
Layer | 8L |
Surface Treatment | Immersion Gold |
Finished Board Thickness | 1.6 mm |
Finished Copper thickness | 1OZ |
Test | 100% |
2. Pictures
Contact Person: Stacey Zhao
Tel: +86 13392447006
Fax: 86-755-85258059